-
Version as main switch
-
Number of contacts as change-over contact
-
Rated control supply voltage AC 50 Hz
-
Rated control supply voltage AC 50 Hz
-
Rated control supply voltage AC 50 Hz
-
Type of accessory/spare part
-
Busbar thickness
-
Suitable for number of poles
-
Number of contacts as change-over contact
-
Function
-
Rated control supply voltage AC 50 Hz
-
Connection type
-
Rated control supply voltage AC 50 Hz
-
Version as maintenance-/service switch
-
Number of contacts as normally open contact
-
Rated control supply voltage AC 60 Hz
-
Rated control supply voltage AC 60 Hz
-
Rated control supply voltage AC 60 Hz
-
Rated control supply voltage AC 60 Hz
-
Busbar width
-
Busbar width
-
Rated control supply voltage AC 60 Hz
-
Version as safety switch
-
Number of contacts as normally closed contact
-
Rated control supply voltage DC
-
Rated control supply voltage DC
-
Suitable for
-
Rated control supply voltage DC
-
Rated control supply voltage DC
-
Rated control supply voltage DC
-
Material
-
Version as emergency stop installation
-
Version as emergency stop installation
-
Voltage type for actuating
-
Voltage type for actuating
-
Voltage type for actuating
-
Version as reversing switch
-
Perforated
-
Max. conductor cross section
-
Max. conductor cross section
-
Rated operating voltage
-
Type of electric connection
-
With extension shaft
-
With extension shaft
-
Max. rated operation current Ie
-
Type of electrical connection of main circuit
-
Max. rated operation voltage Ue AC
-
Number of auxiliary contacts as change-over contact
-
Number of auxiliary contacts as change-over contact
-
Suitable for power circuit breaker
-
Rated permanent current Iu
-
Rated permanent current Iu
-
Rated permanent current Iu
-
Rated permanent current Iu
-
Rated permanent current Iu
-
Rated permanent current Iu
-
Suitable for emergency stop
-
Suitable for emergency stop
-
Rated permanent current Iu
-
Rated permanent current Iu
-
Rated permanent current Iu
-
Rated permanent current Iu
-
Suitable for round conductor connection
-
Surface protection
-
Suitable for switch disconnector
-
Suitable for sector conductor connection
-
Mounting method
-
Delayed
-
Suitable for strip conductor connection
-
Suitable for off-load switch
-
Rated permanent current at AC-21, 400 V
-
Rated permanent current at AC-21, 400 V
-
Rated permanent current at AC-21, 400 V
-
Rated permanent current at AC-21, 400 V
-
Rated permanent current at AC-21, 400 V
-
Rated permanent current at AC-21, 400 V
-
Rated permanent current at AC-21, 400 V
-
Rated permanent current at AC-21, 400 V
-
Rated permanent current at AC-21, 400 V
-
Rated permanent current at AC-21, 400 V
-
Type of control element
-
Type of control element
-
Suitable for motor safety switch
-
Conditioned rated short-circuit current Iq
-
Device construction
-
Suitable for overload relay
-
Rated operation power at AC-23, 400 V
-
Rated operation power at AC-23, 400 V
-
Rated operation power at AC-23, 400 V
-
Rated operation power at AC-23, 400 V
-
Rated operation power at AC-23, 400 V
-
Rated operation power at AC-23, 400 V
-
Rated operation power at AC-23, 400 V
-
Rated operation power at AC-23, 400 V
-
Rated operation power at AC-23, 400 V
-
Rated operation power at AC-23, 400 V
-
Rated short-time withstand current lcw
-
Rated short-time withstand current lcw
-
Number of auxiliary contacts as normally open contact
-
Number of poles
-
Number of poles
-
Number of auxiliary contacts as normally closed contact
-
Contact safe
-
Colour
-
Colour
-
Height
-
Height
-
Width
-
Width
-
Motor drive optional
-
Depth
-
Motor drive integrated
-
Voltage release optional
-
Voltage release optional
-
Suitable for floor mounting
-
Suitable for front mounting 4-hole
-
Suitable for front mounting centre
-
Suitable for distribution board installation
-
Suitable for intermediate mounting
-
Colour control element
-
Interlockable
-
Degree of protection (IP), front side
-
Halogen-free

Terminal shields (2) - for DPX-IS 250

Padlock with flat key - for DPX-IS 630 - ABA90 GEL6149

Rear terminals (6) - for DPX 250 ER - up/downstream - 3P

Rear terminals (8) - for DPX 250 ER - up/downstream - 4P

Padlock - Ronis - for DPX-IS 250 - factory assembled

Rotary handle - vari-depth for DPX-IS 1600 - standard

Rotary handle - vari-depth for DPX-IS 1600 - for emergency use

Circuit breaker DPX3 630,4 poles, with rated current of 250A and rotary knob electronic protection unit.

Circuit breaker DPX3 630,4 poles, with rated current of 320A and rotary knob electronic protection unit.

Circuit breaker DPX3 630,4 poles, with rated current of 400A and rotary knob electronic protection unit.

Circuit breaker DPX3 630,4 poles, with rated current of 500A and rotary knob electronic protection unit.

Isolating switch - DPX-IS 250 with release - 4P - 250 A - left-hand side handle

Circuit breaker DPX 250,4 poles, with rated current of 160A and thermal magnetic protection.

Circuit breaker DPX 250,4 poles, with rated current of 250A and thermal magnetic protection.

Circuit breaker DPX 250,3 poles, with rated current of 63A and thermal magnetic protection.

Circuit breaker DPX 250,3 poles, with rated current of 100A and thermal magnetic protection.

Circuit breaker DPX 250,3 poles, with rated current of 160A and thermal magnetic protection.

Circuit breaker DPX 250,3 poles, with rated current of 250A and thermal magnetic protection.

Circuit breaker DPX 250,4 poles, with rated current of 63A and thermal magnetic protection.

Circuit breaker DPX 250,4 poles, with rated current of 100A and thermal magnetic protection.

Circuit breaker DPX 250,4 poles, with rated current of 160A and thermal magnetic protection.

Circuit breaker DPX 250,4 poles, with rated current of 250A and thermal magnetic protection.

Earth leakage modules 3 poles, with rated current of 400A, for DPX3 630 circuit breaker

Earth leakage modules 4 poles, with rated current of 400A, for DPX3 630 circuit breaker